AREA OF USAGE / UTILITY:
- Damp (Rising, Penetrating and Condensation)
- Mould
- Salt Contamination
- Fractured Plastering
- Discolored Walls
- Peeling Paint and Wallpaper
- Fungal Decay
- Thermal Heat Loss
- Avoids Unpleasant Musty Odors
- Avoids Decreasing Value of Property
- Prevents Structural Problems
- Prevents Damp-related Health Issues
KEY FEATURES:
- Resists the attack of salts like chlorides and sulphates that are present in the soil.
- Easy to apply
- Cold applied
- Adheres to concrete
- Can be applied in closed or confined spaces
- Water-based
- Non-flammable
- Versatile
- Economical
Colour/Form: Black | Liquid
Packaging: Available in 20 Kg drums
Shelf Life : 12 Months from the date of manufacture whenmaintain in protected storage in original unopened
sealed condition.
Storage Conditions
Store under cover out of direct sunlight and protect from extremes of temperature. In tropical climates the product must be stored in an airconditioned environment. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
For Full-Surface Waterproofing.
TT DPC Coat is applied by brush or roller in two layers. The first layer is applied 2-3 hours after priming and while primer is still tacky. The second layer should be applied crosswise after 8-24 hours, depending on the weather conditions.
Application Method For Local waterproofing of cracks.
In this case, the primer is applied on the substrate only along the cracks, to a width of 10-12 cm. Two three hours after priming, the first layer is applied and, while is still fresh, a 10 cm wide polyester fleece strip (60 g/m2 or 120 g/m2) is embedded lengthwise. Two extra layers are applied along the cracks, completely covering the reinforcement
