AREA OF USAGE / UTILITY:

• Torch Tar Bitumen Bond is ready to use and is recommended for sticking roofing felts on concrete, masonry, timber, asbestos, tiles and metal surface.
• Torch Tar Bond is ideal for sticking waterproofing felts to roofs of railway coaches and buses.
• Water proofing of walls and roofs.
• It can also be applied where Vertical walls are exposure to sand filling or water bodies.

KEY FEATURES:

Torch Tar Bitumen Bond is a cold applied adhesive and does not require any torching. Therefore, it is useful for applications where use of hot bitumen / torching is difficult or prohibited.

Storage Conditions:       Store under cover, out of direct sunlight & protect from extremes of temperature. In tropical climates the product must be stored in ambient environment. Failure to comply with the recommended storage conditions may result in premature deterioration of the product.

APPLICATION METHODOLOGY:

• Surface to be treated should be dry, clean and free of foreign material.
• Apply TT Bond on the cleaned surface @ 0.5 kg per sqm with a spatula or brush.
• Allow approximately 10 minutes before laying felt and sticking the same with mild pressure.
• For more effective waterproofing, seal overlaps and termination by affixing 6 inch flashings of the membrane on overlapping area after application of Torch Tar Membrane.